19Pc Front Wheel Drive Hub Bearing Adapter Press Kit Removal Disassembly Puller

Description

19Pc Front Wheel Hub Drive Bearing Puller Press Adapter Puller Removal Tool Kit
Product Description
Comprehensive set for the removal and installation of front hub bearings
No dismantle of steering assembly needed
Heavy duty steel drifts
Drift Size:
2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
Hub Screws:
(3) M12x11.5, (3) M14x1.5mm
Suitable for
most front wheel drive cars, vans & light trucks
These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle, eliminating the need for front end alignment once the work is done
Include
1 x Steel Drifts : 38mm
2 x Drift : 86mm, 91mm
1 x Receiver Sleeve : 76mm
9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
3 x Hub Screw : M12 x 1.5 mm
3 x Hub Screw : M14 x 1.5 mm
Operation:
Step.1
Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2
Assemble the tool components, and press out the worn bearing.
Step.3
Lightly lubricate the new bearing, and position it for installation with the tool
components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4
Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5
Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6
Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
Everything needed for the job is included, providing the most effective removal and installation of wheel bearings.
No hammering to remove and install the bearing. Avoids damaging the hub, bearing or other parts of the car.
Includes multiple sizes of drifts, can be used for various car models. suits domestic and imported front wheel drive cars and light trucks.