New BAILEIGH BS-330SA Single Miter Semi-Auto Band Saw 1001521

Description

Specifications
Capacity Round (90/45deg)               13”/8.86”
Capacity Square (90/45deg)               13”/8.86”
Capacity Rectangular (90/45deg)       13”x18.9””/11”x10.04”
Blade Size (H/W/L)                            1.25” / .043” / 161.4”
Blade Speed (fpm)                              82-2703
Blade Guide                                        Carbide / Roller
Miter Angle                                         0 – 45 deg
Miter Adjustment                               Head/Vice
Table Height                                       30.5
Descent Control                                  Pressure Assist Hydraulic
Return                                                 Hydraulic
Drive                                                   Belt/Pulley
Motor                                                  3 hp
Power Requirement                            220v / 3 phase
Shipping Dimensions (L/W/H)           90” / 37” / 61”
Shipping Weight                                 3650 lbs
Semi- Automatic down feed and up feed
Hydraulic clamping vise
The BS-330SA band saw uses a 1-1/4" band saw blade, making it an extremely accurate and fast cutting saw.
Saw head provides rigidity and swivels 0-45 degrees.
Direct gear drive helps extend saw blade life, and allows saw head to make more accurate cuts and cut faster.
Hydraulic descent feed can be adjusted by operator.
Powerful coolant pump cools blade and assists chip removal system.
Broken blade tension device shuts down machine if blade breaks.
The BS-330SA is a metal cutting band saw capable of cutting 13" OD and is the perfect semi-automatic bandsaw for cutting at 90 degrees or single miter angles. This saw can cut up to 13" x 18½" material, meaning you get more value for your investment than with any other saw on the market. Quick releases allow the operator to change the miter angle in seconds. Each gear driven metal cutting band saw we offer has variable speed, miter heads, and a hydraulic controlled descent device for perfect feeds and longer blade life. The vise uses a hydraulic clamping system and after the cut is complete the blade stops, the vise opens and the head lifts to the start position for the next piece to be cut. Our band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Each band saw has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks.
The BS-330SA metal band saw has a hydraulic descent for larger production runs that increases blade life and reduces operator fatigue. It has a hydraulic descent control device for the down feed, that is reset when the head is automatically lifted. This metal band saw series can cut up to 13" OD capacities. This series of band saw requires 220V, Three Phase, 60 Hertz. The BS-330SA semi automatic horizontal band saw has a miter saw head that can cut from 90 to 45 degrees. This series of horizontal band saw comes standard with a variable speed drive allowing the operator to fine tune the blade speed from 114' to 262' / min. The BS-330SA metal cutting saw series requires a 1-1/4" wide saw blade by .042" wall thickness, making this series a very precise miter saw. These band saws offer more cutting capacity in a variable speed miter saw than any other saw on the market, for the investment.
ORDERS? QUESTIONS? CALL US 866-532-296 2
Please note this item ships direct from the manufacturer. Lead time may exist. Please call us before ordering to check stock.
We are an authorized distributor for Baileigh products. Please Email me Tom at moore-tool dot com or call me with any questions.
Best regards,
Tom Moore
Moore Tool & Equipment
X